Weather synopsis

Ross Weiss, Serge Trudel, Tamara Rounce, David Giffen, Jennifer Otani and Meghan Vankosky
Categories
Week 15

This past week (July 28 to August 3, 2020) prairie temperatures were warmest in southeastern Alberta and southwestern Saskatchewan and coolest in southern Manitoba and the Peace River region of Alberta and British Columbia (Fig. 1). Temperatures in the past week represent a switch from previous weeks, where it was warmer in Manitoba than in Alberta. Average 30-day temperatures (July 5 to August 3, 2020) continue to be cooler across most of Alberta than observed in eastern Saskatchewan and Manitoba (Fig. 2). The average 30-day temperature at Winnipeg and Brandon continued to be greater than locations in Alberta and Saskatchewan (Fig. 2).

Figure 1. Observed average temperatures across the Canadian prairies the past seven days (July 28-August 3, 2020).
Figure 2. Observed average temperatures across the Canadian prairies the past 30 days (July 5-August 3, 2020).
Figure 3. Mean temperature difference from Normal the past 30 days (July 1-31, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (13Jul2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209

Cumulative rainfall for the past 7 days was lowest across southern regions of Alberta, Saskatchewan and Manitoba (Fig. 4). Cumulative 30-day rainfall was lowest across a large area ranging from southwest Saskatchewan to Saskatoon (Fig. 5). Growing season rainfall (percent of average) is below normal across eastern Saskatchewan and localized areas of Manitoba and above normal across most of Alberta (Fig. 6).

Figure 4. Observed cumulative precipitation across the Canadian prairies the past seven days (July 28-August 5, 2020).
Figure 5. Observed cumulative precipitation across the Canadian prairies the past 30 days (July 5-August 3, 2020).
Figure 6. Percent of average precipitation for the growing season (April 1-August 3, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (04Aug2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209

The growing degree day map (GDD) (Base 5 ºC, April 1-August 3, 2020) is below (Fig. 7) while the growing degree day map (GDD) (Base 10 ºC, April 1-August 3, 2020) is shown in Figure 8.

Figure 7. Growing degree day map (Base 5 °C) observed across the Canadian prairies for the growing season (April 1-August 3, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (06Aug2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209
Figure 8. Growing degree day map (Base 10 °C) observed across the Canadian prairies for the growing season (April 1-August 3, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (06Aug2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209

The highest temperatures (°C) observed across the Canadian prairies the past seven days ranged from <24 to >32 °C (Fig. 9). So far this growing season (as of August 6, 2020), the number of days above 25°C ranges from 0-10 days throughout much of Alberta and into the BC Peace then extends up to 51-60 days in southern Manitoba (Fig. 10).

Figure 9. Highest temperatures (°C) observed across the Canadian prairies the past seven days (April 1-August 3, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (06Aug2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209
Figure 10. Number of days above 25 °C observed across the Canadian prairies this growing season (April 1-August 5, 2020).
Image has not been reproduced in affiliation with, or with the endorsement of the Government of Canada and was retrieved (06Aug2020). Access the full map at http://www.agr.gc.ca/DW-GS/current-actuelles.jspx?lang=eng&jsEnabled=true&reset=1588297059209

The maps above are all produced by Agriculture and Agri-Food Canada. Growers can bookmark the AAFC Current Conditions Drought Watch Maps for the growing season. Historical weather data can be access at the AAFC Drought Watch website, Environment Canada’s Historical Data website, or your provincial weather network.

SHARE THIS POST

Predicted bertha armyworm development

Ross Weiss, Tamara Rounce, Owen Olfert, Meghan Vankosky and Jennifer Otani
Categories
Week 15

Model simulations for August 3, 2020, indicate that BAW development varies across the prairies. Figures 1 and 2 demonstrate that BAW populations near Winnipeg (Fig. 1) are more advanced than populations near Grande Prairie (Fig. 2). Populations near Winnipeg are predicted to be developing to pupae (Fig. 1). BAW populations near Grande Prairie are expected to be primarily in the larval stage (Fig. 2).

Figure 1. Predicted bertha armyworm (Mamestra configurata) phenology at Winnipeg MB as of August 3, 2020.
Figure 2 Predicted bertha armyworm (Mamestra configurata) phenology at Grande Prairie AB as of August 3, 2020.

Weekly Pheromone-baited Trapping Results – Early season detection of bertha armyworm is improved through the use of pheromone-baited unitraps traps deployed in fields across the Canadian prairies.  Click each province name to access moth reporting numbers observed in AlbertaSaskatchewan and Manitoba (as they become available). Check these sites to assess cumulative counts and relative risk in your geographic region but remember in-field scouting is required to apply the economic threshold to manage both this pest and its natural enemies. For convenience, screen shots of the above maps or data have been placed below for Alberta, Saskatchewan, and Manitoba.

Monitoring:

  • Larval sampling should commence once the adult moths are noted.
  • Sample at least three locations, a minimum of 50 m apart.
  • At each location, mark an area of 1 m2 and beat the plants growing within that area to dislodge the larvae.
  • Count them and compare the average against the values in the economic threshold table below:

Scouting tips:
● Some bertha armyworm larvae remain green or pale brown throughout their larval life.
● Large larvae may drop off the plants and curl up when disturbed, a defensive behavior typical of cutworms and armyworms.
● Young larvae chew irregular holes in leaves, but normally cause little damage. The fifth and sixth instar stages cause the most damage by defoliation and seed pod consumption. Crop losses due to pod feeding will be most severe if there are few leaves.
● Larvae eat the outer green layer of the stems and pods exposing the white tissue.
● At maturity, in late summer or early fall, larvae burrow into the ground and form pupae.

Refer to the PPMN Bertha armyworm monitoring protocol for help when performing in-field scouting.  Use the images below (Fig. 4) to help identify the economically important larvae.  Review the 2019 Insect of the Week which featured bertha armyworm and its doppelganger, the clover cutworm! 

This image has an empty alt attribute; its file name is 2019_PPMN-Protocol_BAW_LifeStages_Williams.png
Figure 4. The egg stage (A), larval stage (B), pupal stage (C), and adult stage (D) of bertha armyworm. Photos: Jonathon Williams (AAFC-Saskatoon).

Biological and monitoring information related to bertha armyworm in field crops is posted by the provinces of ManitobaSaskatchewanAlberta and the Prairie Pest Monitoring Network. Also refer to the bertha armyworm pages within the “Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and management field guide” which is a free downloadable document as both an English-enhanced or French-enhanced version.

SHARE THIS POST

Predicted diamondback moth development

Ross Weiss, Tamara Rounce, Owen Olfert, Meghan Vankosky and Jennifer Otani
Categories
Week 15

Based on Harcourt (1954) the DBM model was run with a biofix of May 15, 2020. Model runs (as of August 3, 2020) were conducted with weather data for 2020 (Fig. 1) and climate normals (long term average temperatures). The first map illustrates that potentially three generations have been completed across Manitoba and southeastern Saskatchewan (Fig. 1). Most of the prairies have had two generations (Fig. 1). The second map, showing results for climate normal data, indicates that prairie populations should have completed two generations (Fig. 2).

Figure 1. Using a biofix date of May 15, 2020, the projected number of diamondback moth (Plutella xylostella) generations across the Canadian prairies as of August 3, 2020.
Figure 2. Using a biofix date of May 15, 2020, the projected number of diamondback moth (Plutella xylostella) generations across the Canadian prairies using Climate Normal data.

The charts provide location specific details regarding potential development at Winnipeg (Fig. 3) and Lacombe (Fig. 4). The first chart illustrates DBM development at Winnipeg. Results indicate that there is potential for a fourth generation of DBM to occur in southern Manitoba. Populations near Lacombe are predicted to be completing the second generation.

Figure 3. Predicted diamondback moth (Plutella xylostella) phenology at Saskatoon SK. Values are based on model simulations (April 1-August 3, 2020).
Figure 4. Predicted diamondback moth (Plutella xylostella) phenology at Lacombe AB. Values are based on model simulations (April 1-August 3, 2020).

Monitoring:

Remove the plants in an area measuring 0.1 m² (about 12″ square). Beat them on to a clean surface and count the number of larvae (Fig. 5) dislodged from the plant. Repeat this procedure at least in five locations in the field to get an accurate count.

This image has an empty alt attribute; its file name is DBM_Larva_AAFC.jpg
Figure 5. Diamondback larva measuring ~8mm long.
Note brown head capsule and forked appearance of prolegs on posterior.
This image has an empty alt attribute; its file name is DBM_Pupa_AAFC-1.jpg
Figure 6. Diamondback moth pupa within silken cocoon.

Economic threshold for diamondback moth in canola at the advanced pod stage is 20 to 30 larvae/ 0.1  (approximately 2-3 larvae per plant).  Economic thresholds for canola or mustard in the early flowering stage are not available. However, insecticide applications are likely required at larval densities of 10 to 15 larvae/ 0.1 m² (approximately 1-2 larvae per plant).

This image has an empty alt attribute; its file name is DBM_adult_AAFC-1.png
Figure 7. Diamondback moth.

Biological and monitoring information for DBM is posted by Manitoba AgricultureSaskatchewan Agriculture, and the Prairie Pest Monitoring Network.  

More information about Diamondback moths can be found by accessing the pages from the  “Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and Field Guide“.  View ONLY the Diamondback moth page but remember the guide is available as a free downloadable document as both an English-enhanced or French-enhanced version.

SHARE THIS POST

Predicted grasshopper development

Ross Weiss, Tamara Rounce, Owen Olfert, Jennifer Otani and Meghan Vankosky
Categories
Week 15

As of August 3, 2020, the grasshopper model estimates that prairie grasshopper populations are primarily adults (Fig. 1). Based on model simulations, development has been slowest across central and northern regions of Alberta (Fig. 1). The second map provides an overview of where oviposition is predicted to have started (Fig. 2). The yellow and red areas show that oviposition has begun across southern Manitoba and southeastern Saskatchewan (Fig. 2).

Figure 1. Predicted average development stages of grasshopper (Melanoplus sanguinipes) populations across the Canadian prairies (as of August 3, 2020).
Figure 2. Predicted oviposition for (Melanoplus sanguinipes) populations across the Canadian prairies (as of August 3, 2020).

The two graphs compare grasshopper development at Saskatoon (Fig. 3) and Brandon (Fig. 4). Near Saskatoon, grasshopper populations are expected to be mainly in the adult stage with oviposition beginning to occur over the past week (Fig. 3). Around Brandon, adult emergence is complete and oviposition should be well underway (Fig. 4).

Figure 3. Predicted grasshopper (Melanoplus sanguinipes) phenology at Saskatoon SK. Values are based on model simulations (April 1-August 3, 2020).
Figure 4. Predicted grasshopper (Melanoplus sanguinipes) phenology at Brandon MB. Values are based on model simulations (April 1-August 3, 2020).

Biological and monitoring information related to grasshoppers in field crops is posted by Manitoba AgricultureSaskatchewan AgricultureAlberta Agriculture and Forestry, the BC Ministry of Agriculture and the Prairie Pest Monitoring Network.  Also refer to the grasshopper pages within the “Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and management field guide” (Philip et al. 2018) as an English-enhanced or French-enhanced version.

SHARE THIS POST

Lygus bug in canola

Jennifer Otani
Categories
Week 15

On the Canadian prairies, lygus bugs (Heteroptera: Miridae) are normally a complex of several native species usually including Lygus lineolaris, L. keltoni, L. borealis, L. elisus although several more species are distributed throughout Canada. The species of Lygus forming the “complex” can vary by host plant, by region or even seasonally.

Lygus bugs are polyphagous (i.e., feed on plants belonging to several Families of plants) and multivoltine (i.e., capable of producing multiple generations per year). Both the adult (Fig. 1) and five nymphal instar stages (Fig. 2) are a sucking insect. Adults overwinter in northern climates. The economic threshold for Lygus in canola is applied at late flower and early pod stages.  

This image has an empty alt attribute; its file name is 2019_Lygus_lineolaris_AAFC-Sask.png
Figure 1. Adult Lygus lineolaris (5-6 mm long) (photo: AAFC-Saskatoon).
This image has an empty alt attribute; its file name is 2019_Lygus_nymph_AAFC-Sask.png
Figure 2. Fifth instar lygus bug nymph (3-4 mm long) (photo: AAFC-Saskatoon).

Damage: Lygus bugs have piercing-sucking mouthparts and physically damage the plant by puncturing the tissue and sucking plant juices. The plants also react to the toxic saliva that the insects inject when they feed. Lygus bug infestations can cause alfalfa to have short stem internodes, excessive branching, and small, distorted leaves. In canola, lygus bugs feed on buds and blossoms and cause them to drop. They also puncture seed pods and feed on the developing seeds causing them to turn brown and shrivel.

Scouting tips to keep in mind: Begin monitoring canola when it bolts and continue until seeds within the pods are firm. Since adults can move into canola from alfalfa, check lygus bug numbers in canola when nearby alfalfa crops are cut.

Sample the crop for lygus bugs on a sunny day when the temperature is above 20 °C and the crop canopy is dry. With a standard insect net (38 cm diameter), take ten 180 ° sweeps. Count the number of lygus bugs in the net. Sampling becomes more representative IF repeated at multiple spots within a field so sweep in at least 10 locations within a field to estimate the density of lygus bugs. In fact, sampling is most accurate when repeated at a total of 15 spots within the field.  Samples can be taken along or near the field margins. Calculate the cumulative total number of lygus bugs and then consult the sequential sampling chart (Figure 3). 

This image has an empty alt attribute; its file name is 1998_SequentialSampling_WiseAndLamb.png
Figure 3. Sequential sampling for lygus bugs at late flowering stage in canola.

If the total number is below the lower threshold line (Fig. 3), no treatment is needed. If the total is below the upper threshold line, take more samples. If the total is on or above the upper threshold line, calculate the average number of lygus bugs per 10-sweep sample and consult the economic threshold tables (Tables 1 and 2).

The economic threshold for lygus bugs in canola covers the end of the flowering (Table 1) and the early pod ripening stages (Table 2). Once the seeds have ripened to yellow or brown, the cost of controlling lygus bugs may exceed the damage they will cause prior to harvest, so insecticide application is not warranted. Consider the estimated cost of spraying and expected return prior to making a decision to treat a crop. 

This image has an empty alt attribute; its file name is 1998_EconomicThreshold_LateFlower-EarlyPod_Captions-1024x488.png
This image has an empty alt attribute; its file name is 1998_EconomicThreshold_Pod_Captions-1024x461.png

Remember that insecticide applications at bud stage in canola have not been proven to result in an economic benefit in production.  The exception to this is in the Peace River region where early, dry springs and unusually high densities of lygus bug adults can occasionally occur at bud stage.  In this situation, high numbers of lygus bugs feeding on moisture-stressed canola at bud stage is suspected to result in delay of flowering so producers in that region must monitor in fields that fail to flower as expected.

How to tell them apart: The 2019 Insect of the Week’s doppelganger for Wk 15 was lygus bug versus the alfalfa plant bug while Wk 16 featured lygus bug nymphs vs. aphids!  Both posts include tips to to discern the difference between when doing in-field scouting!

Biological and monitoring information related to Lygus in field crops is posted by the provinces of Manitoba or Alberta fact sheets or the Prairie Pest Monitoring Network’s monitoring protocol.  Also refer to the Lygus pages within the new “Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and management field guide” – both English or French versions are available.

SHARE THIS POST

Thrips in canola

Jennifer Otani and Owen Olfert
Categories
Week 15

Thrips in canola (Thynsanoptera) – While scouting at this time of year, curled canola pods may be encountered.  The culprits are quite possibly thrips.

Figure 1. Thrips damage observed in canola in the northeast of Saskatchewan in July 2016 (Photo: AAFC-Saskatoon, Olfert 2016).

Damage: Flower thrips (Thysanoptera) are pests of a broad range of plants including cereals and broadleaved crops such as canola. Thrips are minute, slender-bodied insects with rasping-sucking mouthparts and feed by rasping the surface of canola buds and sucking up plant fluids. 

Biology: Thrips have six life stages: egg, two larval stages, a prepupal and pupal stage and an adult. Both adults and nymphs cause damage by feeding on the flower and buds. Limited surveys in 1999 in Saskatchewan and Alberta indicated that the predominant species were Frankliniella tritici (flower thrip) followed by Thrips tabaci (onion thrip) and T. vulgatissimus (no common name).

In canola, pods damaged by thrips are often curled and tend to drop prematurely.  Some species, such as T. vulgatissimus have been credited with contributing to pollination.

Read more about thrips in canola by accessing this article by Olfert et al. 1998).

SHARE THIS POST

Ladybird beetles and mummies

Jennifer Otani
Categories
Week 15

Ladybird beetle larvae (Fig. 1), pupae (Fig. 2), and adults (Fig. 3) can all be found in fields at this time of year.  Take a look at the various stages and the many patterns of native and introduced species to recognize these as Field Heroes!  Ladybird beetles are categorized as general predators and will feed on several species of arthropods but are partial to aphids.  

Figure 1. Ladybird beetle larva (photo credit: AAFC-Beaverlodge)
Figure 2. Ladybird beetle pupa (photo credit: AAFC-Beaverlodge).
Figure 3. Ladybird beetle (Coccinella septempunctata) (photo credit: AAFC-Beaverlodge)

Another “beneficial” found in fields at this point in the season are mummified aphids (Fig. 4). The “mummy” contains a maturing parasitoid wasp which will emerge from the host and seek other aphids to parasitize. Read more about the amazing Aphidiinae wasps by accessing the pages from the  “Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and Field Guide“.  The guide is available as a free downloadable document in both an English-enhanced or French-enhanced version.

Figure 4. An aphid “mummy” adhered to a wheat awn.  A “mummy” is the aphid host transformed to enclose a soon-to-emerge parasitoid wasp (photo credit: AAFC-Beaverlodge).
SHARE THIS POST

West nile virus risk

David Giffen and Jennifer Otani
Categories
Week 15

Health Canada posts information related to West Nile Virus in Canada and also tracks West Nile Virus through humanmosquitobird and horse surveillance.  Link here to access the most current weekly update (reporting date July 12-18, 2020; retrieved Aug 11, 2020). The screenshot below (retrieved Aug 11, 2020) serves as reference but access that Health Canada information here.

This image has an empty alt attribute; its file name is 2020Jun28-Jul04_WNV_Weekly_HealthCanada-1024x593.png

The following is offered to predict when Culex tarsalis, the vector for West Nile Virus, will begin to fly across the Canadian prairies (Fig. 1). This week, regions most advanced in degree-day accumulations for Culex tarsalis are shown in the map below (yellow, orange then red highlighted areas).  As of August 5, 2020 (Fig. 1), areas highlighted yellow and more imminently orange are approaching sufficient heat accumulation for mosquitoes to emerge.  Areas highlighted red NOW HAVE Culex tarsalis flying (Fig. 1) – protect yourself by wearing DEET!  

Figure 1. Predicted development of Culex tarsalis, across the Canadian prairies (as of August 5, 2020).
SHARE THIS POST

Stored product pests

Jennifer Otani
Categories
Week 15

The Canadian Grain Commission’s website has an online key to stored product pests.  Growers managing grain storage can find an online identification tool for stored product pests (e.g., Rusty grain beetleRed flour beetleConfused flour beetleSaw-toothed grain beetle, and more).  The online tool features excellent diagnostic photos.  A screen shot of the Canadian Grain Commission’s “Identify an Insect” webpage is included below for reference.

SHARE THIS POST

Provincial insect pest report links

Jennifer Otani
Categories
Week 15


Provincial entomologists
provide insect pest updates throughout the growing season so link to their information: 

Manitoba‘s Crop Pest Updates for 2020 are available. Access the August 5, 2020 report. The summary indicates that, “Grasshoppers are currently the biggest insect concern. Some sunflower midge has been observed in sunflowers in the Eastern region, mainly around field edges, which is typical for this insect. Lygus bugs have also been noted in sunflower fields. Diamondback moth larvae in canola remains a concern for growers and agronomists in the Eastern region, with lots of scouting and some limited insecticide applications occurring.”

Saskatchewan‘s Crop Production News (for Issue 6). Read Issue 5 which includes articles on Bertha armyworm, Cabbage seedpod weevil,  FieldWatch – Fostering Communication Between Applicators and Producers, and Look What the Wind Blew in! Diamondback Moths Arrived Early This Spring. Issue #4 included articles on Pest Scouting 101: Mid-Summer, and The Wheat Midge.

•  Alberta Agriculture and Forestry’s Agri-News occasionally includes insect-related information or Twitter users can connect to #ABBugChat Wednesdays at 10:00 am.

SHARE THIS POST

Crop report links

Jennifer Otani
Categories
Week 15

Click the provincial name below to link to online crop reports produced by:

• Manitoba Agriculture and Rural Initiatives – Other viewing options include subscribing to receive or access a PDF of August 4, 2020 report.

• Saskatchewan Agriculture  or access a PDF of July 28-August 3, 2020 report.

• Alberta Agriculture and Forestry or access a PDF of July 28, 2020 report.

The following crop reports are also available:

• The United States Department of Agriculture (USDA) produces a Crop Progress Report (read the August 3, 2020 edition).

• The USDA’s Weekly Weather and Crop Bulletin (read the August 4, 2020 edition). 

SHARE THIS POST

Previous posts

Jennifer Otani
Categories
Week 15

Click to review these earlier 2020 Posts (organized alphabetically):

    • 2019-2020 Risk and forecast maps

    • Alfalfa weevil (Wk08)

    • Aster leafhopper (Wk05)

    • Beetle data please! (Wk03)

    • Cereal aphid APP (Wk11)

    • Crop protection guides (Wk02)

    • Cutworms (Wk02)

    • Diamondback moth (Wk11)

    • Flea beetles (Wk02)

    • Field heroes (Wk14)

    • John Doane (Wk10)

    • Monarch migration (Wk10)

    • Pea leaf weevil (Wk11)

    • Pea leaf weevil – predicted development (Wk09)

    • Prairie provincial insect webpages (Wk02)

    • Wheat midge (Wk13).

    • Scouting charts – canola and flax (Wk02)

    • Ticks and Lyme Disease (Wk06)

    • Wind trajectories (Wk09)

    • West nile virus (Wk14)

SHARE THIS POST

Oat Pests / Feature Entomologist: Héctor Cárcamo

Finch Van Baal
Categories
Week 15

This week’s Insect of the Week feature crop is oat, a plant grown across the Prairies for both food production and livestock feed. Our feature entomologist this week is Héctor Cárcamo.

Oat – AAFC

A versatile food and feed crop, almost 90% of Canadian oat production takes place across Manitoba, Saskatchewan and Alberta. In 2019 Canada was the world’s third largest oat producer, and number one oat exporter. In the same year, total Prairie production seeded over 1.3 million hectares (3.2 million acres) was over 3.8 million metric tonnes (4.2 million US tons).

Various pest species target oat. Monitoring and scouting protocols as well as economic thresholds (when available) are found in Field Crop and Forage Pests and their Natural Enemies in Western Canada: Identification and Management and the Cutworm Pests of Crops on the Canadian Prairies: Identification and Management Field Guide. Additional monitoring protocols exist to control certain pests.

Oat field – AAFC
Oat Pests
  • Army cutworm
  • Armyworm
  • Black grass bugs
  • Cereal leaf beetle
  • Chinch bug
  • Darksided cutworm
  • Dingy cutworm
  • English grain aphid
  • Fall armyworm
  • Fall field cricket
  • Glassy cutworm
  • Grasshoppers
  • Green grass bugs
  • Greenbug
  • Oat-birdcherry aphid
  • Pale western cutworm
  • Redbacked cutworm
  • Rice leaf bug
  • Say stink bug
  • Variegated cutworm
  • Wheat head armyworm
  • Wheat stem maggot
  • Wireworms
English grain aphids – AAFC

ENTOMOLOGIST OF THE WEEK: Héctor Cárcamo

Name: Héctor Cárcamo
Affiliation: AAFC, Lethbridge Research and Development Centre
Contact Information: hector.carcamo@agr.gc.ca

How do you contribute in insect monitoring or surveillance on the Prairies?

I contribute by helping to develop survey protocols for resurging native insect pests (wheat stem sawfly, 2003) or new invasive pests (pea leaf weevil, 2005; cereal leaf beetle, 2007). With my team we also conduct surveys to tackle research questions such as farm threshold validations or landscape studies for lygus bugs, cabbage seedpod weevil and cereal leaf beetle. Finally, I collaborate with various researchers in the writing of scientific articles from survey data.  

In your opinion, what is the most interesting field crop pest on the Prairies?

It is difficult to name just one! I really like the wheat stem sawfly because it is so well studied and this allows us to ask more refined ecological questions. Plus it forces us to use non-chemical methods to manage it. But if I had to choose only one to work on…I would pick lygus bugs because they are an extremely challenging and complex pest with populations that can increase rapidly. It seems to be almost ‘unpredictable”! Also it is highly polyphagous and as a species complex, extremely widespread geographically – the tarnished plant bug ranges from Guatemala to Alaska!

What is your favourite beneficial insect?

Well, this is an easy one: a carabid ground beetle of course, my Twitter name gives this one away: @hectorcarabido! Why: because they are so diverse, easy to catch and easy to identify to species. They are also very popular so it is easy to start a conversation over carabid beetles with most entomologists.

Tell us about an important/interesting project you are working on right now.

I am excited about biological control and I am currently leading a national study on biocontrol of cabbage seedpod weevil and I am also equally excited to start the one that got delayed due to COVID-19: A survey of parasitism of lygus nymphs in emerging and established crops.

What tools, platforms, etc. do you use to communicate with your stakeholders?

I regularly do interviews with the farm media and work with the technology transfer platforms used by the various commodity associations that fund our research. I have also contributed to our AAFC fact sheets or other technology transfer publications. Recently I have started to use Twitter and I have participated regularly in the weekly #abbugchat.

SHARE THIS POST

SHARE THIS POST